DuraTrack Dozer Undercarriage, US Stock
Dozer Track Rollers, In Stock in Texas
DuraTrack track rollers for crawler dozers and track loaders, held in US stock in Texas and shipped the same day on orders placed by 4:00pm CT. Listed by make and model for CAT, John Deere, Komatsu, Case and Liebherr machines, in single flange and double flange.
Each roller has a forged shell, heat treated, on a hardened forged alloy or rolled carbon steel shaft with heavy-duty seals, built to OEM specification in ISO 9001 approved facilities.
- Held in US stock, same-day shipping on a 4:00pm CT cut-off
- Grade 10.9 roller bolts shipped with the rollers
- Custom dozer track groups assembled in our Houston workshop
Shipping & Warranty
Get a QuoteTrack Rollers by Dozer Make
Rollers are listed for more than 450 crawler dozer and track loader models, including the CAT D6, D8 and D9, John Deere 650, 700, 750 and 850, Komatsu D39, D61, D65 and D155, Case 650, 750, 850, 1150 and 2050M, and Liebherr PR724 to PR756. Can not find your machine? Send the make, model and serial number and our team will confirm the roller.
More Dozer Undercarriage Parts from US Stock
Dozer Undercarriage
Complete undercarriage and kitsSALT chains, track groups, rollers and idlers, supplied individually or as half and full kits.
Dozer undercarriage
Dozer Track Chains
Sealed and lubricated (SALT)Oil filled, with internal bushing life up to 50% longer than a greased and sealed chain.
Dozer track chains
Track Groups
SALT chain and shoes, assembled to orderAssembled to order in our Houston workshop and shipped ready to fit.
Track groups
Track Shoes
560mm to 915mm single grouserSingle grouser dozer shoes on heavy-duty baseplates, boron steel, through hardened.
Track shoes
Idlers
Front and rear, complete cast assembliesCast idler assemblies with heavy-duty seal groups, shafts and brackets.
Idlers
Dozer Sprocket Segments
Three or five tooth sectionsForged and through hardened, with tooth profiles induction hardened to over 50RC.
Dozer sprocket segments
Carrier Rollers
Single flange, double flange and shaft typeGuide the track over the undercarriage frame, with reinforced flanges and heavy-duty seals.
Carrier rollers
Undercarriage Hardware
Grade 12.9 and 10.9, metric and imperialTrack, segment and split master bolts to grade 12.9; sprocket and roller bolts to grade 10.9.
Undercarriage hardwareHow to Identify Your Dozer Track Rollers
Rollers change between models, and often between serial number ranges of the same model. Five details let our team confirm the right roller before it ships.
| What to check | Why it matters |
|---|---|
| Make, model and serial number | Sets the roller for the machine and the serial number range. |
| Single or double flange | A double flange roller gives more guidance to the track link, and dozers normally run a mixture of the two. |
| Track rollers and carrier rollers per side | Tells us how many of each the undercarriage takes. |
| Track shoe width | Measured in millimeters. Wide shoes increase roller tread and flange wear. |
| Markings on the old roller | Any numbers cast into the roller are cross-referenced against our product reference guide. |
Scroll the table sideways to see every column.
Also tell us whether the machine runs a standard undercarriage or a proprietary system such as Cat SystemOne or Komatsu PLUS.
Bottom roller or carrier roller?
How are dozer track rollers built?
Which bolt grade do rollers use?
Dozer Track Roller Wear: What to Look For
The chain rails run on the roller tread, so rollers and chain wear together. Measure both against new dimensions before you buy, so the parts are changed once and together. Our team will tell you what to measure.
- Worn treads and flanges where the chain rails run
- Side wear on the link pin bosses before the links are fully worn
- A track chain jumping on the sprocket
- Packed material between the rollers and the links
Track shoes wider than the job needs speed up roller tread and flange wear. Run the narrowest shoe that still floats the machine and keep the track at the correct tension. Dozing and push loading work the front rollers hardest; ripping works the rear.
Replace all the bottom rollers on a track at once. A single new roller among worn ones stands proud and carries more than its share of the load.
Why Buy DuraTrack Dozer Track Rollers in the US
Held in US Stock
Dozer track rollers held in US stock in Texas, with roller bolts and SALT chains to go with them, maximizing machine uptime.
Quality Approved
Forged, heat treated and built to OEM specification in ISO 9001 approved facilities.
Same-Day Shipping
Order by 4:00pm CT and stocked rollers ship the same day.
Warranty Backed
Three years or 4,000 hours on DuraTrack dozer track rollers, whichever comes first.
Dozer Track Roller FAQs
What is a dozer track roller?
Do you stock dozer track rollers in the US?
Which dozer makes and models do you cover?
Single flange or double flange?
How do I know my track rollers are worn?
Should I replace all the track rollers at once?
What warranty comes with dozer track rollers?
Request a Quote for Dozer Track Rollers
Send the machine make, model and serial number, with the number of track rollers per side and the shoe width if you have them. We confirm the roller against our product reference guide, price it, and ship from US stock.
Talk to the Team
Our team confirms the roller, the flange type and the bolt pattern before anything ships, so the right part arrives first time. Technical advice comes at no additional cost.
Call Us
Testimonials
Trusted by machinery owners and dealers worldwide, our customers rely on Astrak for quality parts, expert support and lasting performance.